The magnetite bill has started climbing. Production has not changed dramatically, but somehow the plant seems to be getting through more material than before.

That is usually when the questions start. Is magnetite being lost somewhere in the process? Is the recovery system doing what it should? Has something changed in the way the plant is operating?

For plant managers focused on reducing magnetite consumption, the important thing is not to jump straight to a new product or assume the magnetite itself is causing the problem. Higher consumption can have several possible causes, and finding the source requires a look at what is happening across the plant.

A useful investigation starts with the numbers, the operating conditions, and a clear picture of how magnetite is moving through the process.

First, establish how much consumption has actually changed

Before investigating why magnetite usage has increased, it helps to establish exactly when the change happened and how significant it is.

Monthly magnetite consumption should be reviewed alongside the amount of coal processed during the same period. Looking only at total tonnes of magnetite used can be misleading if production has also increased.

It is also useful to look at the trend over time. A gradual increase may point to a different set of questions than a sudden change that occurred after maintenance, an equipment adjustment, a change in feed material, or another operational event. The objective is to establish a reliable baseline before trying to identify the cause.

Where could the magnetite be going?

Once the increase has been confirmed, the investigation can move further into the plant. Material losses are one area that may need attention. Magnetite can potentially be lost through different parts of the process, including spillage, transfer points, or other areas where material is handled.

These losses are not always obvious. Small losses repeated throughout a shift can add up over time, which is why looking at the overall handling and recovery process can be more informative than focusing on a single point.

Recovery-system performance matters

The recovery system is another important part of the investigation.

Coal-washing operations rely on recovering magnetite from the process so that it can be returned to use. If recovery performance changes, the plant may need to add more magnetite to maintain the required operating conditions.

That does not automatically mean there is a problem with the magnetite being supplied. Equipment performance, maintenance, operating conditions and other factors within the recovery circuit may all need to be considered.

Looking at recovery performance alongside consumption figures can therefore help the technical team narrow down where further investigation is needed.

Do not overlook handling and storage

Not every magnetite loss happens during the actual separation process.

How magnetite is received, stored, transferred, and handled around the plant can also be relevant. Spillage, inefficient transfer arrangements, or changes in handling practices may contribute to material losses that are easy to overlook when the focus is entirely on the processing circuit.

A technical assessment should therefore consider the complete journey of the magnetite rather than looking at only one section of the operation.

Have the operating conditions changed?

Sometimes the most useful clue is found in the plant’s operating history. Changes in feed material, throughput, production targets, or process conditions can affect magnetite requirements. Equipment changes or maintenance work may also be relevant, particularly if the increase in consumption began around the same time.

Plant managers should make a note of significant operational changes when reviewing consumption trends. Even a seemingly unrelated change can give a technical team useful context when investigating the increase.

The numbers a technical team will want to see

Good records can make the investigation considerably easier.

A plant manager preparing for a technical-support discussion should gather consumption data over a useful period rather than looking at only the latest month’s figures. Where possible, this should include the amount of coal processed during each period so that magnetite usage can be considered in relation to production.

The goal is not to create a mountain of paperwork before asking for help. The more useful information available at the beginning, however, the easier it is for a technical team to understand what changed and where to investigate.

Look at the trend, not just the latest invoice

A single high magnetite bill can get attention, but it may not tell the whole story.

For plant managers concerned about reducing magnetite consumption, comparing historical usage with production and operating data can reveal whether the increase is temporary or part of a longer-term trend. It can also help identify when the change began and what else was happening in the plant at that point.

That context matters because there is rarely one obvious explanation for increased consumption.

When technical support makes sense

If consumption continues to rise and the cause is not immediately apparent, bringing in technical support can help move the investigation beyond assumptions.

The purpose of the assessment is to understand the plant’s particular circumstances and identify the areas that may require closer attention. Depending on the information available, that could include material losses, recovery performance, handling practices, or changes in operating conditions.

It is important not to assume in advance that the magnetite product itself is responsible. The same consumption problem can have very different causes from one plant to another.

Reducing magnetite consumption starts with understanding the problem

For a coal-washing plant, reducing magnetite consumption is not simply about using less material. It is about understanding why the plant is using the amount it is using and whether anything in the operation has changed.

Consumption records, production figures and plant information provide a useful starting point. From there, a technical review can help investigate possible losses, recovery performance, handling practices and operating conditions without jumping to conclusions about the cause.

If your plant is seeing rising magnetite usage or costs, Martin & Robson can discuss the operating information with your team and help determine whether a technical assessment is appropriate. Contact Martin & Robson to discuss your plant’s magnetite consumption, operating conditions, and technical-support requirements.