Magnetite Specifications for Lithium DMS
“We need magnetite for our lithium-processing plant.”
That’s a starting point, but there’s still quite a bit a supplier needs to know.
Is the plant using dense media separation? Has the medium specification already been established? What particle size is required, and how much material will the operation consume?
The required magnetite grade depends on the ore, the separation method, and the operating conditions of the processing circuit. Even plants treating the same lithium-bearing mineral may need different product specifications.
For procurement teams, this means working with the plant’s technical team before requesting prices. The intended use, required material properties, and any existing laboratory results should form the basis of the enquiry.
Where Does Magnetite Fit Into Lithium Processing?
Magnetite is used in mineral processing for its density and magnetic properties. One application is dense media separation (DMS), where a controlled medium helps separate minerals according to differences in density.
In certain hard-rock lithium operations, DMS is used to concentrate spodumene-bearing material before further processing.
Spodumene is denser than common associated minerals such as quartz and feldspar. Under suitable conditions, this difference allows the heavier spodumene-bearing particles to be separated from lighter unwanted material.
A dense medium makes that separation possible.
Depending on the required operating density and circuit design, the medium may contain magnetite, ferrosilicon, or a combination of the two.
Magnetite isn’t necessarily the only material involved, and its role needs to be established during process design.
Not every lithium-processing operation uses DMS. Some ores require flotation or other beneficiation methods, particularly where the lithium-bearing minerals are too finely distributed for effective density separation.
The metallurgical testwork should establish whether DMS is appropriate and which medium composition the circuit requires.
Let the Processing Circuit Determine the Magnetite Grade
A supplier might have several magnetite grades available, but that doesn’t mean the finest or most expensive product is automatically the right choice.
The grade needs to suit the medium preparation, separation and recovery arrangements used by the plant.
For a DMS circuit, the technical team should have information about the operating density being targeted, the equipment being used and the characteristics required of the medium.
A plant using dense medium cyclones, for example, needs to consider how the medium behaves as it moves through the circuit. Stability and flow properties are important to the separation process.
Martin & Robson supplies several magnetite grades, including Maxifine, Ultrafine, Superfine, Fine, Medium, and Coarse products.
These grades have different particle size distributions, with published specifications showing the percentage of material passing particular micron sizes.
If the plant already has an approved product specification, attach it to the RFQ. Recent laboratory results and technical datasheets can also help suppliers identify a suitable product.
What If You Don't Know the Exact Grade?
A new lithium-processing facility may still be establishing its operating requirements. An existing plant might be reviewing its magnetite consumption or considering an alternative grade.
In those situations, provide the available information about the ore, separation process, and intended operating conditions.
Martin & Robson has laboratory and quality-control capabilities that support discussions about magnetite characteristics.
Its testing processes include assessments of magnetic properties, particle sizing, and density, using internal and independent laboratory facilities.
Laboratory results and particle-size data can help establish whether a proposed grade meets the plant’s requirements. Confirm the specification before agreeing to a supply contract.
Particle Size Can Affect How the Medium Performs
Magnetite particle size affects the behaviour of the dense medium, including its stability and flow characteristics.
Material that is too coarse for the application may settle more readily, making it harder to maintain a consistent medium.
An excessive proportion of very fine particles can also create difficulties by affecting the viscosity and flow behaviour of the suspension.
The required particle size distribution should reflect the circuit’s operating conditions and the separation performance it needs to achieve.
When approaching a supplier, specify the required particle size distribution, including acceptable limits for oversize particles and fines.
For an established operation, the current product specification and recent quality results provide a useful basis for comparison.
Martin & Robson publishes sizing information for its magnetite grades, including the percentages passing 45-micron and 53-micron screens.
For example, its published specifications show that Ultrafine magnetite has 90-95% passing 45 microns, while Fine magnetite has 80-86% passing the same size.
These figures illustrate the difference between the grades. They do not, on their own, establish which product is suitable for a particular lithium-processing circuit.
The required limits should come from the plant’s technical specification and supporting testwork.
Magnetic Content Matters for Recovery and Reuse
In a dense media circuit, magnetite doesn’t simply disappear after the ore has passed through the separation equipment.
The material is generally recovered and returned to the process, with fresh magnetite added to replace losses.
Magnetic separation equipment is commonly used to recover magnetite from the process streams.
This makes the magnetic characteristics of the supplied material an important part of the specification.
If the magnetite does not meet the plant’s required characteristics, its recovery and reuse may be affected.
For operations purchasing substantial quantities over time, magnetite consumption is also an operating cost worth monitoring.
A lower price per tonne may look attractive, but the purchasing decision should account for the product’s performance in the circuit and the quantities that need replacing.
Ask suppliers for the relevant magnetic-content specification and supporting quality information.
Martin & Robson uses Davis Tube testing to assess magnetic properties, alongside other laboratory methods for checking its magnetite products.
Its quality-control procedures include testing material during sourcing and processing, as well as analysing samples after production.
For an existing processing plant, recent magnetite consumption and recovery records can provide useful information when evaluating an alternative grade.
Don’t Confuse Magnetite Density With Medium Density
The density of the magnetite particles and the operating density of the prepared medium are not the same measurement.
The first describes a property of the material being supplied. The second describes the suspension used in the separation process.
In a lithium DMS circuit, the operating medium density is selected according to the ore and the separation that the plant is trying to achieve.
The presence of ferrosilicon or other medium components can also influence how the required density is obtained.
When requesting a quotation, state whether a density requirement refers to the magnetite product itself or to the operating medium.
If the plant uses a mixture of magnetite and ferrosilicon, the technical team should provide the relevant medium specification and explain the intended role of the magnetite.
Suppliers can then assess the required material properties without confusing them with the density at which the complete separation circuit operates.
Use Laboratory Testing to Confirm the Specification
A product datasheet provides technical information about the magnetite, but the proposed grade still needs to be assessed against the plant’s requirements.
This is particularly relevant when commissioning a new circuit, changing suppliers, or considering a different product grade.
An established plant can use recent laboratory results as a baseline when evaluating an alternative grade.
For a new lithium-processing project, the specification may still be based on metallurgical testwork and equipment design.
Before evaluating a product sample, agree on the tests required and the acceptance limits that will apply.
These may include:
- Particle size analysis: Does the proposed material meet the required size distribution?
- Magnetic-property testing: Does the product meet the specified magnetic characteristics?
- Density testing: Does the material meet the required particle-density specification?
- Product consistency: How will the agreed characteristics be checked during ongoing deliveries?
The precise tests and acceptable results should reflect the plant’s technical requirements.
Martin & Robson follows established quality-control procedures that include sampling during processing and laboratory analysis.
Its published testing methods include Davis Tube analysis for magnetic properties, particle sizing using wet screening and Malvern Mastersizer equipment, and independent density testing using a pycnometer.
For a new supply arrangement, the plant and supplier should also agree on the quality documentation that will accompany deliveries.
An approved sample is a useful starting point. Subsequent deliveries still need to meet the agreed specification.
Quantities and Delivery Requirements
In a DMS circuit, magnetite is recovered and reused. Fresh material is generally required to replace losses rather than the entire quantity of medium each time the process operates.
For an existing plant, historical consumption records can help establish the expected purchasing volume.
A new operation may need an initial quantity for commissioning and medium preparation, followed by regular deliveries once production has started.
Provide the supplier with the initial order quantity, forecast monthly consumption, and any planned increases in production.
The delivery location, packaging format, and required lead times should also be included.
Martin & Robson offers loose bulk and bagged magnetite supply, supported by international sourcing and logistics capabilities.
Its experience supplying magnetite to the mining industry, including lithium operations in Australia, provides relevant experience for discussions about product requirements and supply planning.
For ongoing contracts, confirm expected consumption, delivery frequency, lead times, and how changes in demand will be accommodated.
What to Include in Your Magnetite Enquiry
Before sending a request for quotation, make sure the technical and procurement teams have gathered the relevant information.
- Lithium-processing application: What role will magnetite play in the process?
- Separation method: Is the plant using dense media separation or another process?
- Medium requirements: What operating density and medium composition have been specified?
- Magnetite grade: Is there an existing approved product or specification?
- Particle size: What distribution and acceptable limits are required?
- Magnetic properties: What magnetic-content requirements apply?
- Testing: Are laboratory results, samples, or quality certificates required?
- Quantity: What is the initial order and expected ongoing consumption?
- Delivery: Where is the material going, how must it be packaged, and when is it needed?
If the plant is still completing its metallurgical testwork, provide the information already available and identify which requirements are awaiting confirmation.
Get the Specification Right Before Placing the Order
Before requesting a quotation, confirm the magnetite’s intended role, required particle size distribution, magnetic properties, and density requirements. Include the expected order quantity and delivery schedule.
Martin & Robson supplies magnetite for mineral processing applications, supported by quality control, technical assistance, and international logistics.
The company has established product grades and laboratory capabilities that can support discussions about magnetite requirements for suitable processing applications.
Contact Martin & Robson to discuss your lithium-processing requirements and the product information needed to evaluate a suitable grade.